Quest Stopped Shooting?

[Pimpin_da_Dye]

I was shooting my gun, then I turned it off, then I turned it back on after a few minutes and it just stopped firing.

Got any ideas?

[gremlin75]

Battery....change it ;)

later
gremlin

[dezblazer]

Battery....change it ;)

later
gremlin

that'll do it :)

[Pimpin_da_Dye]

It's still not doing anything besides turning on and letting me change the eye from on to off.

[gremlin75]

Well make sure the battery you changed it to is not going bad also. Then make sure the noid is pluged all the way in.

later
gremlin

[NYGuardians capt.]

Well make sure the battery you changed it to is not going bad also. Then make sure the noid is pluged all the way in.

later
gremlin
yeah either of those will do it

[dezblazer]

yup

[jeffreyjames]

check your trigger sets too

[Pimpin_da_Dye]

It was the trigger jeffreyjames, but the screw keeps going back after about 10 shot. So I keep having to re-adjust my trigger.

[gremlin75]

It was the trigger jeffreyjames, but the screw keeps going back after about 10 shot. So I keep having to re-adjust my trigger.

Blue locktite FTW!!

Seriously just take the screw all the way out, put a drop of blue locktite on it then put it back, adjust the trigger, and let the locktite set over night.

later
gremlin

[paintballeruknow]

same thing happened to me....didnt have an loctite so I put some Big Red gum on it FTW

[jeffreyjames]

mine did it to me my first day with it. i just reset it and its stayed so far. didnt have to re-loctite it. just do what gremlin says, its not a big deal.

if you dont have any loctite, a little dab...and i mean a little dab..of nailpolish will work too.