quest Lpr pressure

[markjr89]

ok i traded my ego for a 06 quest and was wondering what psi peopel are runnign there quest at so plz post lpr and dwell settings.

[younggunna6898]

like 70-90

[chaddimichele]

turn your hpr threads in untill you see 3 threads, then turn lpr in clockwise untill it cycles fully, then add 1/4 or 1/2 additional, then id raise my dwell untill i see no rise in fps over the crono
1. turn hpr in untill you see 3 threads
2. turn lpr clockwise untill it cycles fully (and if it does cycle already then turn it in counter clockwise untill it doesnt then start to turn clockwise) then add an aditonal 1/4 or 1/2 turn in
3. adjust hpr to vlocity
4.
5.profit

[Physcojosh]

80-90 for break in < maybe 3 case's? >

then u can drop down , mines at 50-55 ,dwell 5.0 and its Rockin

[shutter_elite]

mines at 50psi w/ dwell of 11... 5 mine will go pfft and fart outta air. haha. works good at where its at. but indeed, after you break it in you should be able to lower it more

[markjr89]

ok im ask the guy what he got it on now