New member problems :(

[SckSckTch]

Well guys I just got my quest and wow I traded my damn dm6 for this and i was so impressed by the AMAZING feel it had when held. It truly stopped my gun whoring days, I took it home and the simplicity of the bolt astounded me and I could tell this was a gun i could keep and it would never go down. I opened it up
and started ripping and it felt really nice but had some kick that was a little more than what a DM felt like. I took the gun to the field for a local tourney and was suprised that it would chop like crazy. This resulted in me having to field strip it and clean the eyes etc. However, again confetti out the barrel. Any thoughts? I know quests dont shoot like this (I hope? :( )
Stock Settings LPR gauge says 105 psi
Thanks FEP FAM!
Nick

[shutter_elite]

should be able to drop lpr down to 60 or so if using a good lube (slick honey, hater, ect) mine has no kick/shootdown @ 50 psi, dwell off 11 @ 280 fps, what size bore/paint? good paint? good battery?try turning up the loader delay a little (not sure if stock has) used to nox chip,
I use a .692 ul lpr 50, hpr? dwell 11, loader delay of 3 (reloader b), and get no breaks/chops

[2ffu]

i can't even get my bolt to move with the lpr lower than 80psi.

[.:{}:.]

i heard of a dwell at 10 and lpr at 60ish. never tried it. but try dropping your lpr a little bit, about 90ish

[paintballer37991]

Make sure your ABS is not too high because the bolt may be hitting the ball too hard. I have seen this happen before and changing the ABS solved the gun blowing up the paintball in the breech.

[CK army]

maybe the paint is too big for the barrel.

like shootin big ball out of a .683

[shutter_elite]

should always overbore any ways, but i use a little mix up of lubegel & aci gun oil for a lube, slick stuff, dwell was up @ 16 before and shot well, 11 is about the lowest i can get away with without problems. like said about the abs, make sure it isn't to high (i had mine way up) and it caused that problem as well. But try and use a different lube other than the 55 they send ya and it should help.

[LU_aDaK]

i do an lpr of 75-80 dwell at 9

BUT, considering my quest turned into a blender on day also, i suggest buying a brand new battery, even if the one u had was "brands new" Also i have had slightly diff results based on the battery position.


Fresh batter FTW.

[younggunna6898]

turn lpr down, loader delay up, abs dwell down,