PT Xtreme

[ArMyOfOnE]

How do you adjust the velocity on a PT extreme? Also what are other ways besides adding a gas through could you attach a remote?

[Meph]

It has an RVA (rear velocity adjuster) on it. You turn it, then take the allen wrench and lock it in place w/ the tourney lock.

And why do you want a remote? There's a quick change on there for a reason. Puting a remote on it like that defeats it's purpose.

If you want to use a tank like that, just get a Rebel. Practically same thing.

[zao]

i wouldnt use a remote, there hurt your accuracy

[zao]

they leak alot too

[Meph]

Ummmm... since when did a remote do that? I've never had them do anything like you said zao. If anything, they are even beneficial w/ CO2 users because they act like an expansion chamber.

However, I guess I could help ya here too. With the PTX, there's a little knob right between the grip and the quick disconnect.

Take a wrench, turn out this little plug. And there you can screw in a bottom line adaptor for you to put a remote on there.

[Mossman]

i was hoping you could use that hole behind the 12gram adapter for co2...but i opened it up and the brass insides are in the way. When my on/off tank comes I will find out, but im not sure if its gonna work. I will let you guys know

[PBking82]

Ok, The velocity thing i think you got. Here you are on the remote thing. What you need to do is take that little brass nut off(don't break the head off, a friend of mine did that. it has locktite on it so use a ratchett of wrench after you heat the nut up to melt the locktite) Then you screw in a 1/8" air hose line and run it down to a C/A adapter on the bottom of the gun and screw that into the holes allready in the grip. Next you put a QD adapter into the bottom line C/A adapter and run the the remote into that. REMEBER YOU MUST HAVE AN EMPTY 12g IN THE QUICK CHANGE FOR THIS TO WORK!!! so just put a spent 12g in the quick change and then gas it up with the remote. Peace-J

[jonnymag]

if you set it up to run remote not only toes the remote act as a an expansion chamber but the empty CO2 cartiridge does as well, the CO2 is forced in there first and any liquid left gets another chance to expand.

[c4onastick]

If you remove the bolt spring and put in a spyder one (just cut off a few coils so it is the right length) that can greatly increase velocity.