Marker problems

[darkstar]

My brothers Piranha was not recocking so I put my internals into his gun and it worked fine but I couldnt find anything wrong with it so I put his in mine and it worked!?
So I need to try to work with it some more but does anyone have any suggestions. the O rings were ok and the sear looked good. thanks Patrick

[Lethal Piranha]

hey, when u said u put your internals in and it did good, does that mean that u tried shooting it with whatever air system you have, or u just cocked it back without the co2 or whatever turned on?

[oldyellr7]

hmmmmm, I don't really know what is going on there, but try putting some oil inside the parts. Right where you hook up your c02 bottle/ nitrogen bottle, put some oil right in that hole. When you gas the gun up, fire a few blank rounds to get the oil up into the parts.

[Lethal Piranha]

okay, heres what happened to my piranha the other week, my tank o-rings kept bursting like mad, and my gun would quit shooting and wouldn't cock all the way so what i did was oil the part where the tank goes into the bottom line, and the o-ring on the tank and then oiled my internals, and refilled my co2 bottle and it worked after that. also check to see if the hammer o-ring is still on b/c my busted and that messed it up a little.

[darkstar]

We are using Co2, the dwarf borrowed one of my cut springs
and it wasnt enough preassure the reason it worked in my gun
I think I had a full tank and SS vaulve!!
Problem solved, for now.....

[Lethal Piranha]

aight man, congrats on your fix:D