Icon Z leak

[cooldude1709]

ok i'm stumped i have an Icon Z and whenever i screw in a co2 i hear a leak inside the gun somewhere. i've dissembled the whole gun down to the last screw and no busted o ring. what do i have to do to fix whatever the problem is?

[WillyW0nka]

check the supseal?

[cooldude1709]

how do i do that?

[WillyW0nka]

take off the V/A , its going to be about an inch long, it should be connected to a spring, its metal like an allen wrench and its got like a cylindrical plastic head that will be either white or black.

[neo71665]

Its called a cup seal.

[aces_13]

if its the cup seal the leak will sound like its coming form the barrell. if it isnt the cup seal check the o-rings again (just because an o-ring isnt broken, doesnt mean it isnt bad) if you can find out for sure exactly were the leak is coming from it will make things alot easier.

[ooglieboogliebob]

well if it's the cupseal .. it'll sound like a stream of airs leaking out of the barrel.. but if it's somewhere else.. just teflon tape all your fittings .. to your steel braided hose.. always good to do ...

[BoiseShockers]

Mine did that just It was leaking out the expantion chamber so I took it off and put some plumers tape(like 2$ for a life supply) and now its perfect again but if its the cup seal then im outa here post a video or something.