diadem double firing.

[dnm]

Whats the deal my diadem is double firing with one shot on each pull and releas like it's on response. And I know it's on semi cause I always have it on Tourny lock. Can some body please help. Iam sure slplattttt will know.Is it the board, and can i get a new one for free. :mad: :mad: :mad:

[RoamingGnome4]

or you can spend 70 dollars on a new one like the rest of us...

[Shibbysan]

Sounds straight forward but have you tried taking it off tournament lock then taking the battery out? After that try setting it on semi with tournament lock off. Try and isolate the problem.

[Axe56]

whats your dwell? how much play in the trigger do you have? sounds like bouncing to me =/

[splattttttt]

it is bouncing. You should raise the debounce. Use this programming sheet. http://www.actionmarkers.com/amSupport/html%20manuals/diadem-manual-programming.htm
Try these settings; Debounce25ms, dwell 13ms. Those are mine, I'll let you borrow them.

[dnm]

thanks I'll see and let ya know what happens

[dnm]

IT Didn't work so Iam gonna adjust my trigger and see what happens. Mabey thats it.

It's shooting like one trigger pull semi then the rest response.

[splattttttt]

try resetting it to factory speck.

[WinterGS]

Put more play into your trigger, and make sure that there is nothing On the trigger or frame. Like paint or dirt. Went through this with My own Dits (Bettie). Took a shot in the frame and had paint on the trigger/grip. Also, setting it THAT short will cause bounce like no ones buisness...Like all the other guys said!

Check that out and Im sure youll be good