LP or HP

[mcg420]

Is the sentinel ts pro designed for High or low pressure.

[splattttttt]

Whith any good inline regulator(Stab if running co2) you could run al low as 250psi. Don't actually own one(but I wish I did)so I can't tell you what main spring to use for an lp set up, most likely a soft one.

[mcg420]

ty for the reply. I got a hp tank and the reg is reading 800psi is this too high

[AM-Lynelle]

no that isn't too high, the sentinel is designed for high pressure

[splattttttt]

ty for the reply. I got a hp tank and the reg is reading 800psi is this too high that reading is telling you how many pounds of pressure for every square inch is left. It'll either be a 3,500 psi to 5,000 psi max, the latter is considered the standard for a max fill at corrent times in the sport. Preset out put pressures from a tank reg are set at the factories to either 800-850psi out put to as low as 450psi out puts. Adjustable tank reg equipped settings are set manually by a user in what's known as double regging. Takes some of the excess labor off an inline, slightly better flow, and might even help with efficiancy, though I'm not 100% sure on it.

[Just Ingen]

Whith any good inline regulator(Stab if running co2) you could run al low as 250psi. Don't actually own one(but I wish I did)so I can't tell you what main spring to use for an lp set up, most likely a soft one.
I can make your wishes come true! *is selling his*
no that isn't too high, the sentinel is designed for high pressure
pfft, high pressure... Mine drinks LP air like it's nothing. Or it did back when I played :( viva photography though.

[mcg420]

Wut would i need to convert my high pressure sentinel in to low pressure. I know prolly a reg. Im sure i need to change out some springs and wut not. ANY ideas, and were i could purchase these products, ty

[Fryloc]

Email Lynelle and get a lp valve.

[Shibbysan]

Speaking of getting things from action markers, how do I get new o-rings for the vari-grip feed neck? Do I have to get them from action markers or can I just pick them up from a hardware store? (If so, what type are they?)

[splattttttt]

I'd hit ACE up for that imo.