Ummm...finally remembered this...

[Team Ace of Spades]

ok, i have a problem with my hopper/feedneck...had it ever since i got the senti, but never remembered to post about it

i think my hopper may be forever stuck in my feedneck :(

this could be trouble when I get a halo to feed my upgraded senti/diadem, which i will soon

it's a rico 2KX, and it is just stuck. I've tried prying and everything, only think i haven't tried is oil (cant find any) i've even tried taking apart the hopper and pulling one side out at a time

will oil help, or am i doomed?

[drakepaintballer]

those o rings hold the hopper in real tight what did was hold the marker really tightly between my legs or have a friend do it. and twist the hopper and only thehopper clockwise while pulling up on it at the same time.

[boomslang]

Keeping the gun clamped in a vice or something (use a towel to prevent marring the anodizing) will help you apply the torque to free your hopper.

[WinterGS]

Ahhhh...

Just hit it with a hammer

[totdoc]

haha...yeah, that will get it unstuck fo sho! ;)

[Fryloc]

If it's a screw in feedneck just unscrew it and get another feedneck.

[plushdragon]

put the marker feed neck and hopper without the batters in the freezer to try and shrink the plastic.if you have to use a little dw-40 to get the o-rings to slide.you will just have to wipe the oil off the feed neck.

[deadmanbluff]

or instead of oil just use water and dropp a whole bunch of water between the feddneck and hopper

[RoamingGnome4]

I had to take out 2 oring out of my midrise on my senti so i could fit my egg 2 on. My revy fits fine. But everything else is really snug on it. Just take the orings out and keep them someplace safe. When you get it off. If your changing it into a diadem anyways youll wanna lowrise.

[G-lant]

Ahhhh...

Just hit it with a hammer

QFT!! that always works