Post your Interceptor settings!

[hellbringer]

Everyone post there settings here, LPR and Dwell most importantly and maybe all those other WAS settings.

I'm not too sure what settings I need for dwell. I'm at 8 right now and about 80psi lpr, but its not shooting very consistantly and it sounds like a cannon.

Thanks, B

[Oc_rage]

what barrel are you useing?

Dwell=10
lpr 85-90 ish

[hellbringer]

Longbow(properly sized), could of been the paint, but other people were using the same thing with better results and my dm4 was shooting the same paint more consistantly with a ul.

I'll try uping the dwell, it came set at 6, but halfway into the day I bumped it up to 8 to try and get it shooting better. When I put the lpr in the 90-100 range I get considerably more kick though.

[Grapepress]

Silly question, but have you lubed your bolt? Sometimes if you do not lube the bolt, the o-rings will generate enough friction to cause kick. I know it seems like a silly thing, but those are generally the culprits. I used a little Dow33 on the o-rings...very light coat. wipe off any excess from around the bolt port in the bottom of the bolt.

[xsv1fan]

i use my lpr at around 100 to 120 and i have the stock setting just not with it caped.

[Oc_rage]

wow id lower your lpr to around 90 if i were you xsv

[xsv1fan]

yea i know i lowered it to bout 110 to 100 sunday and it worked. i have had the gun sence march or maybe april and havent lowered it intill now.

[hellbringer]

I oiled the bolt with synthetic pmi oil. Should I have slick honey around should I use that instead?
What is stock dwell anyways? (my gun came with an old board(non psp) so I'm not sure the stock settings are the same, I need to send the board in to get the new one after I play this weekend)

[xsv1fan]

i have the old board to right now. i belive the dwell is at 15 when u get it

[Grapepress]

fellas...please read the manual. It has all of the answers to your questions. Stock dwell is at 8. When I spoke with Jack he stated that I should avoid using a petroleum based lube aka slick honey or pmi oil. Also if you know someone with an equalink you should be able to download the new version for a limited amount if any at all(ask your timmy buddies or local pro shop)