Help!!!!!!

[DeAdLyNeMeSiS13]

I have a Piranha sts g2, AND MY LOW PRESSURE CHAMBER IS LEAKING!!!! It's leaking out of the hole in the front of it, the o-ring's fine. I'm wanting to camo it and i could put tape over it to stop the leaking easily enough, but does nebody know what's wrong?

[Lethal Piranha]

if you know what you're doing, take the cap off the ram air chamber and take the internals out. if u will consult with your manual look for the piston o-ring....that should be your problem....if not it should be something inside the ram air

[SuPrBuGmAn]

Thats a Ram Air chamber on your Piranha, not an LPC.

Your best bet would be to throw the Ram AIr in the trash and get a real LPC. The LPC works just as well but doesn't have any pistons or holes to go out or leak.

[raddishpickle]

hey maybe the threads on ur low pressure chamber are stripped

[DeAdLyNeMeSiS13]

will a taso spyder low pressure chamber fit my piranha?

[SuPrBuGmAn]

Yes.

[DeAdLyNeMeSiS13]

if i did get a LPC for a spyder would i have to just take the RAM air chamber out, or would i have to take out the vertical ASA adapter too?

[SuPrBuGmAn]

Just the RAC.

[DeAdLyNeMeSiS13]

thanks man u've been a BIG help!